Craftsman Table Saw Miter Gauge

If you’re in the market for a precision saw, then you should definitely consider a craftsman table saw miter gauge. Not only is this piece of equipment incredibly accurate, but it’s also versatile – perfect for use in a variety of woodworking projects. Plus, thanks to its easy-to-read markings, you’ll be able to get the job done quickly and accurately. So if you’re in need of a quality table saw miter gauge, then be sure to checkout this option.

Follow this Table for Chosing a Product Quickly

Our Recommended what is the best juicer for leafy greens Reviews

Bestseller No. 1
Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop
  • The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs.
  • The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place.
  • The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide. Standard miter slots are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through.
  • Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary.
  • Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading.
Bestseller No. 2
Porter Cable 514007535 Miter Gauge Assembly
  • This is an O.E.M. authorized part
  • Fits various Porter Cable models
  • OEM Part Number 514007535
  • This is a Porter Cable replacement part
  • Part Number 514007535
Bestseller No. 3
Genuine Ryobi 089037007707 Miter Gauge Assembly Fits RTS10
  • Genuine, OEM Ryobi Replacement Part
  • Ryobi replacement miter gauge assembly, part number 89037007707
  • Compatible with: RTS10
SaleBestseller No. 4
POWERTEC 71142 Universal Table Saw Miter Gauge Assembly/Miter Gauge with 27 Angle Stops
  • INCLUDES: (1) Miter Gauge for Table Saw
  • FUNCTION: A high performance woodworking angle tool that possesses a miter guide which mounts into the miter slots of your table saw (band saws and other applications) and then guides the miter gauge parallel to the blade for high precision angled and crosscuts
  • FEATURES: A lightweight design with a durable laser-cut aluminum construction, large gauge handle, universal fence mounting bracket, pivoting locking mechanism, a removal plate that allows the miter gauge to be used with T-slotted and non T-slotted miter slots, and adjustable expansion discs that remove all side play from the bar, creating a perfect fit.
  • PRECISION: Angle guide with 27 total locking stops in 5 degree increments over a full 180-degree range, and allows for plus or minus 60-degree range miter cuts
  • UNIVERSAL DESIGN: Works with most Contractor style, full sized saws, or tools with standard miter slots (3/4” width x 3/8” depth) with or without T-slots, making it compatible with popular brand table saws, band saws, router tables, disk and belt sanders. PLEASE NOTE : will not work with smaller saws or tool with 5/8” miter slots.
SaleBestseller No. 5
Fulton Precision Miter Gauge with a Standard Slot (3/4” x 3/8”) Steel Bar with Adjustable Spring Loaded Plungers and Removable Retaining Disc
  • If you own a table saw and you need to make a crosscut at any angle then you know how valuable a miter gauge can be. You may also know that the miter gauge that came with your saw is not terribly accurate or durable. Not to mention that the fit in the miter slot may not be all that great as well. The Fulton Miter Gauge is a high quality, well thought out and economical solution to your table saw cross cutting needs.
  • The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.
  • To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place by tightening the post knob handle. The aluminum head has two ¼” x ½” slots milled into it for mounting a miter fence if so desired. The slots are approximately 1-1/8” from the base of the miter gauge head.
  • The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide. Standard miter slots are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through.
  • The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through. If your saw does not have a “T” slot, you can remove the disc. The steel miter bar is also equipped with spring loaded, adjustable plungers on the side of the bar. The plungers can be adjusted with the provide hex key wrench in or out to provide you with the ideal fit.
Bestseller No. 6
Universal Table Saw Miter Gauge with Fixed Angle Gear Shifting Hole, High Accuracy Miter Saw Protractor Aluminium Push Handle T Track Angle Ruler
  • Scale precision: We have applied the latest laser engraving technology to carve the scale of the beveled pusher, and basically achieved zero error measurement
  • High-quality Material: This miter gauge is made of high-quality aluminum alloy, which is strong and durable, and the surface is anodized, which is not easy to rust and can be used for a long time.
  • High braking performance: The diagonal joint is marked with different angles and is equipped with a turning stop device, which can clamp the scale at the correct angle
  • Rubber washer: The combination of rubber washer and round screw effectively increases the anti-skid performance of the scale, and also increases the aesthetics of the beveled push rule
  • Service: If you have any dissatisfaction or questions about our products, you can email us, we will reply you within 24 hours due to the time difference.
SaleBestseller No. 7
POWERTEC 71391 Table Saw Precision Miter Gauge System w/ 27 Angle Stops and 3/4”x 3/8”T-Slotted Miter Bar w/Removable T-Slot Plate; Includes 24”x 3” Multi T–Track Fence w/Scale, T-track Flip Stop
  • Includes: (1) table saw miter gauge, (1) multi-track miter fence, (1) t-track flip stop
  • Function: cost effective 3-piece set designed to give you everything you need to produce higher precision cuts (including cross cutting) while with quick and accurate project results
  • High precision miter gauge: features 27 angle indexing stops with 1-degree step spacing and positive stops at 0°, 10°, 22½°, 30°and 45°and nine others, both left and right (Works in standard 3/4” x 3/8” miter slot, with or without t-slots, but will not work with smaller saws or tool with 5/8” miter slots.)
  • Multi-track miter fence: smooth, built-in laser engraved measuring scale, extruded aluminum profile with a universal design that accepts accept 1/4"-20 hex Bots, 1/4” t-bolts and 5/16” T- bolts, and T-track accessories
  • Miter saw flip stop: delivers exceptional cut-length control, with a toolless locking mechanism and adjustable settings to quick change to the left or right side of the blade
SaleBestseller No. 8
OEM N507559 Miter Gauge
  • Genuine, OEM Replacement Part
  • Replacement miter gauge, part number N507559
  • Compatible with: DWE7491RS, DWE7491RS
SaleBestseller No. 9
Big Horn 14605 Standard Track Miter Gauge
  • ✅ Safety push knob for making mitered cuts on a tablesaw
  • ✅ Steel bar can fit in any standard 3/4" x 3/8" miter slot
  • ✅ Standard 3/4" x 3/8" Track
  • ✅ Degree Angle Range: 30°~90°
  • ✅ Material: Die Casted Zinc Alloy & Steel Bar
SaleBestseller No. 10
VEVOR Precision Miter Gauge, 18" Aluminum Table Saw Miter Gauge w/ 60 Degree Angled Ends for Max. Stock Support and a Repetitive Cut Flip Stop, Miter Saw Fence w/Laser Marking Scale
  • Precise Angle Cutting: This table saw accessory is 0.04 inch / 1 mm high precision. Metric and imperial scale makes your work more convenient. ​Additional trim blocks raises working efficiency. Both sides 60 angle adjustable, ideal for crosscutting wood at a specific angle.
  • Compatible Standeded Slot: Our table saw sled is suitable for a standard 0.75 x 0.38-inch miter slot. Laser marking technology is friction-resistance to ensure accuracy. It is an economical solution for your table saw crosscutting needs. The adjustable, solid aluminum head is machined with 11 positive stop holes. 1 hole is at 90 degrees while the 5 holes on both sides are at 10, 22.5, 30, 45, 60 and 90 degrees.
  • Premium Sturdy Construction: This woodworking tool is made of aluminum alloy, ensuring its durability and sturdiness. The steel miter bar is equipped with a removable metal retaining disc to prevent accidental lifting.
  • Simple & Secure Operation: An adjusting screw and guide wheel are added in the middle, which is more convenient to insert into the slot hole and fix the seat. The miter gauges are flat without burr, secure, and hands-free.
  • Wide Application: The table saw miter can improve the safety and accuracy of the table saw and the router table. It also can be used for router tables and jointers. Miter gauge fence system is currently a must-have for every family.
Click Here to Leave a Comment Below 0 comments

Leave a Reply: