Hitachi Miter Saw Blades

Did you know that a hitachi miter saw blade is one of the most versatile tools in your toolbox? This versatile saw can be used for a variety of project tasks, from cutting wood to trimming furniture. In this post, we’ll take a closer look at the features and benefits of hitachi miter saw blades, and help you choose the best one for your needs.

Follow this Table for Chosing a Product Quickly

Our Recommended commercial citrus juicer Reviews

SaleBestseller No. 1
Luckyway 12 Inch Miter Saw Blades 32T General Purpose & 80T Fine Finish with 1 Inch Arbor TCT Saw Blade for Cutting Wood 2-Pack
  • DIMENSIONS - Includes 1pc 12*1*32T & 1pc 12*1*80T TCT circular saw blade.
  • APPLICATION - Ideal for cross-cutting softwood, hardwood, plywood, chipboard, multi-board, panels, MDF,plated&counted-plated panels, laminated&Bi-laminate plastic, and FRP. Providing a high degree of finish edge. The blades also can rip cut along the grain.
  • MATERIAL - Fully hardened steel blade body – delivers accuracy and resists bending and deflection for true cuts.
  • FEATURES - Incorporates an ATB (Alternating Top Bevel) offset tooth design, The angle of the tooth scores the surface of the wood in advance of the cut, cleanly cutting the wood fibers before the following teeth remove the chip. This provides for a much smoother cut, with much less chance of splintering the surface of the wood.
  • Tungsten carbide teeth provide excellent wear and heat resistance. The positive cutting angle which provides fast and efficient removal of chips and swarf.
Bestseller No. 2
WEN BL1080 10-Inch 80-Tooth Carbide-Tipped Ultra-Fine Finish Professional Woodworking Saw Blade for Miter Saws and Table Saws
  • Featuring a 10-inch diameter (254 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 6000 RPM
  • Perfect for slicing through both hard and softwoods of all kinds
  • Ultra-thin 1/10-inch kerf (2.4 mm) provides clean and efficient cuts
  • Designed with 80 carbide-tipped teeth for ultra-fine finish wood cutting
  • Compatible with the majority of 10-inch miter saws, jobsite saws, and table saws
Bestseller No. 3
Makita A-93681 10-Inch 80 Tooth Micro Polished Mitersaw Blade Silver
  • PRECISION : ATAF (Alternate Top and Alternate Face) tooth design for ultra precision cutting
  • EFFICIENCY : Japanese ultra-thin kerf carbide-tipped design provides smoother cuts with less drag on the motor
  • ACCURACY : Fully hardened and expertly hand-tensioned steel saw plates for true cuts
  • DESIGN : Micro-grain carbide teeth are honed with up to 600 grit for a mirror finish
  • INCLUDES : 10" 80T Micro-Polished Miter Saw Blade
Bestseller No. 4
JINSINA 10" Miter Table Saw Blade, TCT Metal Cutting Saw Blades with 60T & 5/8" Arbor, Professional for Iron Steel Aluminum Stainless Steel Ferrous Metals
  • 【Universal Dimensions】 10" Tungsten Carbide Tipped saw blade 60T, professional line for metal cutting. Outer diameter: 10", inside diameter: 5/8", operating up to 2500 RPM. Ideal for miter saw, slide miter saw, stationary table saw and portable table saw.
  • 【High Efficiency & Superior Durability】 Our TCT saw blades come with premium tungsten carbide tips that offer premium hardness and excellent wear resistance, which significantly extends the product's service life compared to standard saw blades. At the same time, the sharp cutting edges enable high-speed metal cutting, thus enhancing work efficiency.
  • 【ATB Tip Design】 The ATB tip design allows the saw teeth to cut the material alternately like small knives, reducing the resistance during cutting. This design also lowers the load on cutting equipment, making the process smoother.
  • 【Noiseless & Reducing Vibration】10" saw blade for table saw is equipped with expansion slot dispensing to help reduce noise pollution and provide a more quiet work environment.
  • 【Multiple Uses】 Our cutting blades with high-quality carbide are designed for ultra-fast and clean cutting of steel, carbon steel, stainless steel, iron, aluminum, steel pipe, nickel and other ferrous metals.
Bestseller No. 5
Hitachi 371734 Lower Guard C10Fcg
  • Hitachi 371734 Lower Guard C10Fcg
  • Hitachi genuine part
  • Replacement part
SaleBestseller No. 6
Metabo HPT Miter Saw | 8-1/2-Inch Blade | Linear Ball Bearing Slide System | C8FSES
  • Linear ball bearing slide system for superior accuracy and ease of use
  • Positive miter stops for quick adjustments to 15, 22.5, 31.6, and 45 degrees to the left and right
  • Precise compound cuts with 48 degree bevel angle left and 5 degree bevel angle right
  • Powered by a 9.5 Amp motor with a no-load speed of 5,500 RPM to smoothly handle the toughest cutting applications
  • Adjustable pivot fence broadly supports work piece, such as crown molding lying flat, for improved stability while cutting
SaleBestseller No. 7
DEWALT Miter Saw Blade Combo Pack, 12” Blades, 40 Tooth & 60 Tooth, Fine Finish, Ultra Sharp Carbide (DWA112CMB)
  • UP TO 3X LIFE and UP TO 2X LIFE** - Designed For Increased Accuracy***
  • Patented Body Slot Design for Low Vibration
  • Optimized Tooth Geometry Designed For Increased Accuracy
  • Ultra Sharp Carbide For Clean Cutting
Bestseller No. 8
Freud Thin Kerf Sliding Compound Miter Saw Blade with Premium Tico Hi-Density Carbide Crosscutting Blend for Maximum Performance - 12" Diameter, 72 Teeth, ATB Grind - LU91R012
  • Negative Hook Angle - The 5° negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and towards the fence.
  • Premium TiCo Carbide Blend - Features a high-density TiCo crosscutting blend that maximizes cutting performance, edge retention, and durability, designed to power through tough woods with consistent, clean results.
  • Thin Kerf Design - Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results.
  • Optimized for Sliding Miter Saws - Thin kerf industrial design delivers superior finish cuts when used with sliding compound miter saws, ensuring smooth, clean edges with minimal tear-out.
  • Perma-Shield Coating - Non-stick Perma-Shield coating reduces friction and heat buildup, prevents pitch and resin accumulation, and protects against corrosion, ensuring longer life and smoother operation without stabilizers.
Bestseller No. 9
FOXBC 12 Inch Combination Miter Saw Blade, 60-Tooth, Wood Cutting with 1 Inch Arbor
  • 12 Inch Combination Miter Saw Blade 60-Tooth COMB, .102" Kerf, Hook Angle 15°, Plate .071" with 1" Arbor
  • Combination blade is ideal for ripping and crosscutting wood & wood composites with the goal of a smooth finish.
  • Each set of 5 teeth is separated by a large gullet
  • The blades with high-quality thin kerf and plate for fast, durable, clean cutting, less vibration and noise, and excellent finish
  • Made from high-density FoxCarbide tungsten carbide for toughness, wear-resistance, and long life to increase performance
SaleBestseller No. 10
Metabo HPT 10-Inch Miter Saw/Table Saw Blade, 60T, Fine Finish, 5/8" Arbor, Large Micrograin Carbide Teeth, 5800 Max RPM, 115435M
  • BLADE TYPE: Fine finish blade
  • APPLICATION: Ideal for hardwood, softwood, high quality finish lumber, plywood and MDF
  • TUNGSTEN CARBIDE: Industrial high performance micro grain tungsten carbide provides extreme durability and longevity
  • REDUCED VIBRATION/NOISE: Precision tension balancing reduces blade vibration
  • MAX RPM: 5,800 Max RPM
Click Here to Leave a Comment Below 0 comments

Leave a Reply: