Miter Saw Blade For Laminate Flooring
Follow this Table for Chosing a Product Quickly
Our Recommended 18 volt dewalt saw Reviews
SaleBestseller No. 1
Diablo Melamine, Laminate Flooring, and Wood Saw Blade
- Diablo Melamine, Laminate Flooring, and Wood Saw Blade
- Diablo Melamine, Laminate Flooring, and Wood Saw Blade
- Diablo Melamine, Laminate Flooring, and Wood Saw Blade
- Diablo Melamine, Laminate Flooring, and Wood Saw Blade
- Diablo Melamine, Laminate Flooring, and Wood Saw Blade
SaleBestseller No. 2
Norske Tools NCSBP273 10 inch 80T Melamine Plus Saw Blade for Ultra-Smooth Cutting of Melamine, Laminates, Hardwoods and Laminate Flooring 5/8 inch Bore
- The ULTIMATE finishing blade; features special 35 degree high ATB tooth design for ultra-smooth cutting of melamine, laminate, hardwoods and laminate flooring
- C4 Micro-grain carbide tips precision sharpened on all sides
- Laser-cut body, anti-vibration and expansion slots reduce noise and vibration during operation
- For professional carbinet makers, trim carpenters and avid Do-It-Yourselfers
Bestseller No. 3
Crescent Circular Saw Blade 12 inches X 16 Tooth Laminate Flooring
- Premium Polycrystalline Diamond Teeth (PCD) deliver 75X blade life
- Ultra-thin kerf design for clean, accurate cuts
- Cordless and corded performance for maximum versatility
- Active Shield blade coating protects against heat for reduced gumming
- Laser cut vibration slots minimize blade vibration for maximum stability
Bestseller No. 4
COMOWARE Circular Miter Saw Blade- 10 inch 80 Tooth, ATB Premium Tip, Anti-Vibration, 5/8 inch Arbor Light Contractor and DIY General Purpose Finishing for Wood, Laminate, Plywood & Hardwoods
- UNIQUE DESIGN: PREMIUM TIP, ANTI-VIBRATION DESIGN, LARGE TEETH. General purpose finishing and the 80 teeth tip is made of VC1 tungsten carbide which adds the saw blade's sharpness and provide extended life of saw blade. The large tooth design allows the blade to be safely sharpened more times. Larger spacing between the teeth is more convenient for chip removal and heat dissipation.
- HIGH QUALITY CARBIDE MATERIAL: Provide the best cutting experience, with good cutting performance. Prolong the service life of Saw Blade, and add the sharpness.
- WIDELY USE: The 10" saw blade has a 5/8" diamond arbor which fits into both round and diamond hole blade machine and maintains the stability when in use.
- EXCELLENT ATB STYLE: The ATB style which adds the cutting speed and durability. This helps maximize both the accuracy of the cut and the efficiency of your work, so you can enjoy a job well done and the ability to complete more tasks in less time.
- USER GUIDE: The equipment should be equipped with the safety protection device. When not in use, hang the saw blade away from the damp place to prevent rust.
Bestseller No. 5
Crescent Circular Saw Blade 7 1/4'' X 8 Tooth Laminate Flooring
- Premium Polycrystalline Diamond Teeth (PCD) deliver 75X blade life
- Ultra-thin kerf design for clean, accurate cuts
- Cordless and corded performance for maximum versatility
- Active Shield blade coating protects against heat for reduced gumming
- Laser cut vibration slots minimize blade vibration for maximum stability
Bestseller No. 6
SKIL 3601-02 Flooring Saw with 36T Contractor Blade, Red and black
- Cuts solid, engineered and laminate flooring with ease
- Makes cross, miter and rip cuts
- Lightweight design for transport and use at any project location
- Miter detents at 0, 22.5 and 45 degrees
- Die-cast aluminum miter and rip fence
Bestseller No. 7
PCD Laminate Flooring Blade
- PCD Laminate Flooring Blade
- PCD Laminate Flooring Blade
- PCD Laminate Flooring Blade
- PCD Laminate Flooring Blade
- PCD Laminate Flooring Blade
Bestseller No. 8
WEN BL1012 10-Inch 12-Tooth Diamond-Tipped (PCD) Professional Circular Saw Blade for Fiber Cement and Laminate Flooring
- Featuring a 10-inch diameter (254 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 6000 RPM
- Perfect for slicing through fiber cement board and laminate flooring
- Ultra-thin 1/12-inch kerf (2.2 mm) provides clean and efficient cuts
- Designed with 12 polycrystalline diamond-tipped trapezoidal teeth to prevent wear and tear
- Compatible with the majority of 10-inch miter saws and table saws
Bestseller No. 9
WEN BL1216 12-Inch 16-Tooth Diamond-Tipped (PCD) Professional Circular Saw Blade for Fiber Cement and Laminate Flooring
- Featuring a 12-inch diameter (305 mm), a 1-inch arbor (25.4 mm) and a rating of up to 4800 RPM
- Perfect for slicing through fiber cement board and laminate flooring
- Ultra-thin 1/10-inch kerf (2.4 mm) provides clean and efficient cuts
- Designed with 16 polycrystalline diamond-tipped trapezoidal teeth to prevent wear and tear
- Compatible with the majority of 12-inch miter saws and table saws
Bestseller No. 10
MASTEC 10-Inch 100T Carbide Tooth TCG for Aluminum Saw Blade with 5/8-Inch Arbor
- 【Specification】:10-inch 100 Carbide Teeth 5/8-inch arbor
- 【Application】:Durable smooth cutting and clean cutting.
- 【TCG Tooth】:Triple Chip Teeth blade ideal for cutting Aluminum,Plexiglass,Plastic,Non-ferrous Metals.
- 【Machine use】:Widely used in Miter Saw,Circular Saw,Table Saw.
- 【Good Service】:Please contact us if you have any questions about this saw blade.We guarantee the 100% replacement.Any problems will be solved within 24 hours.