Get Huge Discounts and Special Offers from amazon
Click Here

How to restring a pole saw

Pole saws are one of the most useful gardening tools in the world, and people are using it for centuries. Though many people use electric or gas-powered pole saws, the users of manual Pruning saw remains at large. These manual Pruning saws are cheap and ideal for cutting small branches and picking fruits. Though these are a little bit tricky to operate and that's why you need to know how to restring a pole saw to run the pole saw smoothly.

Those who use their Tree pruning saw regularly; they understand the importance of restringing a pole saw. Before working with the saw, you need to check whether the rope is sturdy or not. If you find the rope damaged or something, then you can restring the pole lopper with the following way.


product name



Greenworks 40V 8-Inch Cordless Polesaw PS40B210

Greenworks 40V 8-Inch Cordless Polesaw PS40B210



WORX WG323 20V PowerShare 10 inch

WORX WG323 20V PowerShare 10 inch

Step  1

Before start working with your garden tool, make sure it doesn't hurt you. That's why it's essential to wear safety gloves and goggles.

Step 2

If you find the rope damaged, then replace the old rope. If you have two pulleys, then it could be a little bit tricky, as the previous loop may loop over. You can take help from an ax or a screwdriver to untie the rope.

Step 3

Now tie the end of the new rope to the anchor eye on the pole at the end of the move able blade. It depends on your pole saws design whether you should tie the cord on the anchor or the grommet. For securing the end of the rope, you can use a hitch or bowline.

Step 4

Run the top of the rope from up or down to the next pulley. If the anchor eye is on the pole, the first pulley should be on the end of the lopper blade, and the reverse is true when the rope anchors to the blade end. You can pull the blade on the inside or the outside of the pulley.

Step 5

If there is no anchor on the pole, then screw an eye-bolt into the main pole to preserve the cord from flapping loose.

Step 6

It's much easier to operate the manual saw with a shorter String. That's why you can cut short it two or three feet. If there is any wooden or plastic chuck available, then you can use it as a grip.

Step 7

If you are using cotton or singe polyester rope, then put a knot at the end of the cord.

Things you will need to restring a pole saw

  1. One fifteen or long durable cord.
  2. Sharp Scissors or knife.
  3. Eyebolts
  4. Goggles
  5. Gloves

Final Verdict

Regularly changing your pole saw cord is essential to operate the Long-handled pruners. The damaged cord could be a reason for any accident. As the process is simple and you don't need any professional to guide it, then you can easily do it. All you need is, to buy a durable rope and 10 to 15 minutes of your valuable time. I guess after reading this; you don't have any confusion about How to restring a pole saw.

Click Here to Leave a Comment Below 0 comments

Leave a Reply: