Stihl 12” Oregon Chain Saw Bar Review

It’s normal that the best saws come with the lengthy chains. The long chains are pretty good when cutting the largest branches of the garden. So it's fine to be lengthy. But the problem arrives when you need a replacement for that chain. The lengthy replacement chains are complicated to find. Here we have found one that is the Stihl 12” Oregon Chain Saw. It is yet another praiseworthy chain from the well-known brand of chains called Oregon. The chain comes with different kind of features that are very rare on the market of chains. If you want a chain that can do both pruning and cutting, it is the right choice for you. It will help you to prune and cut more fast and cleanly. The chain trims the unneeded limbs completely. It has the ability to give your garden a new and decorated look.

Stihl 12 inch Oregon ChainSaw chain

Features Of Stihl Pole Saw Chain Replacement

Perfect Pruning of Branches

The Oregon chain is the best choice when you want to prune your trees and you need a decent chain for this sawing task. This chain has got extraordinary skill in case of cutting and pruning tasks. If you pole saw/chainsaw fails to do some specific hard pruning works, there might be issues with the chain of your saw. You do not need to change the saw and get a new one. The only change is required in the chain. Get this Oregon chain and you will get success to clean your garden.

Rare and Precious

The chain is rare on the market. You will not get these feature of the chain on another typical chain. It is a precious Oregon chain that can be used in most of the saws that are ruling the market. For a good quality saw, it’s hard to find a good replacement for the chain. This chain will obviously be a good addition to your existing saw which is suffering lack of appropriate chain.

Vast Compatibility

The Stihl chain is compatible with most of the well-known saws on the market available recently. It can be used in several saws including Ht 70, Ht 73, Ht 75, Ht 100 etc. If you are using one of these models, do not be late to buy one because it’s a better chain than what you are using. The chain is also compatible saw that uses a 3/8" pitch and .043 gauge chain including 44 links of the drive.

Admirable Sharpness

Sharpness matters a lot for a chain. The chain with poor sharpness is never a good chain no matter what features it has got. This chain is not a chain with poor sharpness and dullness. It is a sharp-edged chain which will cut down the unwanted branches of your garden with no issues. To get sharp cuts, get this Oregon model of the chain.


  • Has the compatibility with several saws including Ht 70, Ht 73, Ht 75, Ht 100 and many other models of saw
  • Can be used with the saw which uses a 3/8" Pitch .043 Gauge Chain with 44 Drive Links
  • Provides satisfying performance even when you are doing the pruning task
  • Made with the quality materials which are suitable for a chain from the Oregon
  • Delivers quite well cuts to the thick branches and doesn’t get dull often

Cons with Solution

The chain is too short for some saw models

Solution: The chain is a decent quality product from the manufacturer of Stihl. They obviously have made a nice chain. But the chain doesn’t get fit with some saws which match its requirements. Well, you have to be wise when you are choosing a chain for your saw. The description says it will match your requirements doesn’t mean it really will. You have to check your requirement manually. Check the measurements of your saw. Measure it by yourself. Then come to the specification of the chain. Match both of the criteria. If these two specifications match with each other, you should go for the chain. If you believe all the things that are written in your saw specification and chain specification as well, you will not get the perfect match chain for your chainsaw/pole saw. The Stihl chain has a length of 44 drive and .043 gauge. After checking your saw measurement by yourself, you can purchase the chain.

Frequently Asked Questions

Q. What file gauge and file should I use along with the saw?
A: You should use the 5\32 inches chainsaw file with it. In terms guide, use the file guide that came with the chain.

Q. Is the length enough for heavy work purpose?
A: Yes, the chain is enough for heavy work. It has a length of 12 inches which can obviously do some tremendous tasks.

Q. What is the weight of this chain?
A: The weight of the chain is only 4.8 ounces. It means your saw will not get weight after adding the chain.

Q. Does the chain fit properly to the listed models?
A: Yes, it does. The chain fits perfectly to the saws. Thus it cut the branches like a professional saw.


Oregon chains are always the first choice for the users. It’s because of their marvelous building quality. They made chains so well and adds a lot of features to that chain. Stihl 12” Oregon Chain Saw is one of their best chains. It also comes with numerous features like the other chains of Oregon. You will be really pleased after using the product. It will boost your saw with the famous 12 inches length. The length is very rare on the market. You can’t get 12 inches length chains at a fair price. Most of the 12 inches chain on the market are from local brands. These local brands have no real guarantee about their products. Even before use of those chains, the chains might break. So never go for those local chains. They will never be durable. On the other hand, this Oregon chain will give you the durability and also incredible cutting performance.

Click Here to Leave a Comment Below 0 comments

Leave a Reply: