Best Tall Screw Jack Stands Based On User Rating

Last Update:

You can trust our selection for Best Tall Screw Jack Stands. Because We have worked hard studying and analyzing 53236 reviews for Tall Screw Jack Stands and rating them. It was a difficult job to list only ten products for Tall Screw Jack Stands where thousands of them available online. I hope it will help you to take final decision for Tall Screw Jack Stands.

Tall Screw Jack Stands
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.

Comparison Chart for Tall Screw Jack Stands

Our team scanned 53236 reviews before putting any suggestions for the Tall Screw Jack Stands in this article.

NoProductScoreAction
1Sunex 6809A, Underhoist Support Stand9.6Buy On Amazon
2Arcan Underhoist Support Stand9.6Buy On Amazon
3SPECSTAR Steel Underhoist Support Lift Jack Stand with 12 Inch Diameter Base 3/4 Ton Capacity9Buy On Amazon
4ESCO 10802 Screw Style Jack Stand8.8Buy On Amazon
5Camco 48866 EAZ LIFT Heavy Duty Slide Out Support - Adjusts from 19"-47" - Made with Rust Resistant Steel - Supports Up to 58.6Buy On Amazon
6EAZ LIFT Telescopic RV Jack8.4Buy On Amazon
7Starrett 190A “Little Giant” Jack Screw Stand8.4Buy On Amazon
8Ultra-Fab Products 48-979003 Ultra Stacker Jacks8.4Buy On Amazon
9YOMILINK Aluminum RV Stabilizer Jacks 4 Pack with Addition Screw Nuts8.2Buy On Amazon
10K Tool International Utility Underhoist Support Stand XD8.2Buy On Amazon

Table Of Content:

1. Sunex 6809A, Underhoist Support Stand

Sunex 6809A, Underhoist Support Stand, ¾ Ton Capacity, 12 Inch Diameter Base, Contoured Saddle, Bearing Mounted Spin Handle, Self-Locking ACME Threaded Screw, Supports Vehicle ComponentsBuy On Amazon
  • 1 YEAR

2. Arcan Underhoist Support Stand

Arcan Underhoist Support Stand, 3/4 Ton Capacity, 12 Inch Diameter Base, Contoured Saddle, Bearing Mounted Spin Handle, Supports Vehicle Components (ALSS15)Buy On Amazon
  • THREADED SPIN HANDLE: Provides a self-locking feature to prevent the stand from lowering without assist.
  • STABILITY: The 12″ diameter base allows for better overall stability.
  • BEARING MOUNTED SPIN HANDLE: Allows for smooth and easy turning when adjusting the height under the load.
  • SLENDER DESIGN: Provides lightweight and easy handling in close quarters.
  • CONTOURED SADDLE: Supports most component configurations.
  • COMPLIES WITH ASME PASE-2014 SAFETY STANDARD: We put all our lifting equipment through voluntary and rigorous third party safety testing to ensure our products are among the safest in the market.
  • LIFTING RANGE 54″ to 82″

3. SPECSTAR Steel Underhoist Support Lift Jack Stand with 12 Inch Diameter Base 3/4 Ton Capacity

SPECSTAR Steel Underhoist Support Lift Jack Stand with 12 Inch Diameter Base 3/4 Ton CapacityBuy On Amazon
  • PREMIUM PERFORMANCE – This underhoist stand is made of the highest-quality steel materials that are durable and powerful and perfect for taking on tough jobs; Max load capacity: up to 3/4 a ton.
  • SLEEK DESIGN – Designed with a slender body, this underhoist stand will help you work in tight spaces and is convenient to pack away in your car or other compact spaces.
  • SOLID BASE – Equipped with a stable 12-inch diameter base of this underhoist stand that helps prevent slippage and makes the work area safer.
  • RESISTS WEAR AND TEAR – Equipped with a rotary handle that rotates easily beneath the load while resisting wear; Simple to use and to complete your next project.
  • EASY ADJUST – Constructed with an ACME-threaded rod that can be adjusted while bearing a load; min height: 1360mm; Max height: 2030mm; Rotary handle bears any weight easily while you adjust the height as necessary; Makes it easy to replace vehicle components.

4. ESCO 10802 Screw Style Jack Stand

ESCO 10802 Screw Style Jack Stand, Short Model, 20 Ton Capacity, 26.8Buy On Amazon
  • Screw style stand makes it easy to hold load at desired height and secure with locking collar
  • Base dimensions 13 in. x 13 in.
  • Wide base – better stability & surface area for jack support
  • Built-in carrying handle for easy positioning
  • 20-Ton capacity per stand
  • Easy to turn handle allows for accurate height extension
  • Sold individually

5. Camco 48866 EAZ LIFT Heavy Duty Slide Out Support - Adjusts from 19″-47″ - Made with Rust Resistant Steel - Supports Up to 5

Buy On Amazon
  • Protects slide out mechanism: Provides support to slide outs when extended
  • Adjustable: Adjusts from 19-inches to 47-inches in height
  • Unique Features: Universal fit top, space saving handle and tethered pin
  • Durable Construction: Constructed of strong, rust-resistant steel
  • Superior Strength: Each supports up to 5,000 lb. Includes: (2) supports
  • Includes: (2) supports

6. EAZ LIFT Telescopic RV Jack

EAZ LIFT Telescopic RV Jack, Set of 2 | Adjusts from 16-inches to 30-inches | Featues a 6,000 lb. Load Capacity (48864)Buy On Amazon
  • Adjustable: From 16-inches to 30-inches
  • Load Capacity: 6000 lb.
  • Features: A quick and easy pull pin that makes it easy to adjust the height of the jack
  • Durable Construction: Constructed of durable steel
  • Powder Coated: Provides maximum rust protection
  • Quantity: Includes (2) Telescopic Jacks

7. Starrett 190A “Little Giant” Jack Screw Stand

Starrett 190A “Little Giant” Jack Screw Stand, Low Profile Mount, Stabilizer - Jack Only Without Attachments - 2-1/4 - 3-3/8Buy On Amazon
  • USE FOR: The Little Giant Tool Jack is used for leveling and as a stabilizer for planer beds, upright drills, and other tools in machine shops.
  • FINE ADJUSTMENT: The 20-pitch screw provides for fine adjustment.
  • RANGE: The jack has a 2-1/4″ to 3-3/8″ (57 to 85 mm) range and a 1-1/4″ (32 mm) diameter base.
  • SECURE BASE: Its serrated bed helps to effectively hold tools in place.
  • JACK ONLY: Sold as the jack only. Product attachments are sold separately.

8. Ultra-Fab Products 48-979003 Ultra Stacker Jacks

Ultra-Fab Products 48-979003 Ultra Stacker JacksBuy On Amazon
  • Aluminum stacker jacks are perfect for tent campers and smaller trailers; Handy 2 pack allows for added stability and support.
  • Extends from 11″ to 17″
  • 6,000 Lb. Capacity
  • Stackable units take up minimal storage space

9. YOMILINK Aluminum RV Stabilizer Jacks 4 Pack with Addition Screw Nuts

YOMILINK Aluminum RV Stabilizer Jacks 4 Pack with Addition Screw Nuts, Screw Jack Stands, Stabilize and Level RV Trailer Camper, Adjustable Height 11.5 to 17.5 Inch, Single Jack Withstand 6000 LbsBuy On Amazon
  • Applicability】The Aluminum RV stabilizer jacks are adjustable from 11.
  • High Quality】A high-quality aluminum jack has maximum strength and anti-corrosion life for easily and safely using.
  • Usage Details】Place the jack in the corner of the trailer frame to achieve the effect of no swing.
  • Attention】Please note that these jacks are only used for stabilization purposes, DO NOT USE TO RAISE.
  • Packing】The package includes 4 RV leveling jacks, with a lovely storage bag.

10. K Tool International Utility Underhoist Support Stand XD

K Tool International Utility Underhoist Support Stand XD, 3/4 Ton Capacity, Large Base, Spin Handle KTI61076Buy On Amazon
  • SUPPORT CAPACITY] – K Tool under hoist stand is rated to support 3/4 ton capacity.
  • LARGE BASE] – Utility under hoist provides a large 12″ diameter base with a wide 1.
  • SPIN HANDLE] – This stand provides a bearing mounted spin handle for easy raising and lowering of the screw mechanism.
  • SELF-LOCKING] -Acme threaded screw gives this stand self-locking positioning ability providing extra safety for use of heavy loads.
  • SUPPORT RANGE] – The support range for this under hoist support stand is 53-1/2″ to 80″.

Tall Screw Jack Stands Buying Guide


Does the thought of finding a great Tall Screw Jack Stands stress you out? Has your mind been juggling between choices when it comes to buying Tall Screw Jack Stands in general, specifically regarding which model to choose?
If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Tall Screw Jack Stands for themselves. We understand the stress associated with the buying process!
Since you’re here, you are obviously curious about Best Tall Screw Jack Stands. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.
There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.
But that’s not always easy, right? That's why we've taken time to compile a list of the best Tall Screw Jack Stands in today's market, on your behalf, so that there will be no more worries for you.
How did we come up with the list, you ask? How did we create this buying guide?
  • First, our algorithms collected as much information available about these products from trusted sources.
  • We employed both Artificial Intelligence and large data volume to validate all collected information.
  • Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Tall Screw Jack Stands currently on the market!
The products aren’t chosen randomly. We consider several criteria before assembling a list. Some of the criteria are discussed below-
  1. Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.
Top Tall Screw Jack Stands brands try to offer some unique features that make them stand out in the crowd. Thus hopefully, you’ll find one ideal product or another in our list.
  1. Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Tall Screw Jack Stands based on that.
  2. Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
  3. Customer Ratings: The hundreds of customers using the Tall Screw Jack Stands before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
  4. Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Tall Screw Jack Stands they used.
  5. Seller Rank: Now, this is interesting! You don’t just need a good Tall Screw Jack Stands, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
  6. Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Tall Screw Jack Stands before putting them on the list.
  7. Durability: Durability and reliability go hand to hand. A robust and durable Tall Screw Jack Stands will serve you for months and years to come.
  8. Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Tall Screw Jack Stands if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
  9. Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Tall Screw Jack Stands on the market, the products that got mostly negative ratings get filtered and discarded.

These are the criteria we have chosen our Tall Screw Jack Stands on. Does our process stop there? Heck, no! The most important thing that you should know about us is, we're always updating our website to provide timely and relevant information.
Since reader satisfaction is our utmost priority, we have a final layer of filtration. And that is you, the reader! If you find any Tall Screw Jack Stands featured here Incorrect, irrelevant, not up to the mark, or simply outdated, please let us know. Your feedback is always welcome and we’ll try to promptly correct our list as per your reasonable suggestion.